Stirling Collection of Victorian Cast Iron Gates & Railings | ||
|
||
|
Dimensions of Stirling cast iron gates and railings The drawings below show the options available. You can mix and match! It is recommended that an intermediate railing post is used approximately every 3.0 metres. It is also recommended that a railing stay is fitted approximately every 3.0 metres. A joiner panel is required to connect to each intermediate railing post on one side only. No joiner panels are required if connecting to piers. A root fixing post is required if installing an automated gate system. A hinge and pivot set is required for base plate fixing posts. |
||
|
GA025 Stirling Cast Iron Driveway Gate Leaf 12ft pair weighing 510kg |
GA114 Stirling Cast Iron Pedestrian Gate 1200mm wide weighing 178kg |
GA028 Stirling Cast Iron Pedestrian Gate 900mm wide weighing 142kg |
|
|
|
|
GA031 Stirling Full Height Railing Post weighing 56kg |
GA027 Stirling Full Height Railing Joiner Panel with Root Fixing weighing 41kg |
GA030 Stirling Full Height Railing Panel with Root Fixing weighing 34.5kg |
|
|
|
|
GA122 Stirling Half Height Railing Post weighing 40kg |
GA120a Stirling Half Height Joiner Panel with Feet weighing 27kg |
GA118a Stirling Half Height Railing Panel with Feet weighing 33kg |
|
|
|
|
DISCLAIMER: ALL MEASUREMENTS ARE APPROXIMATE AND MAY VARY SLIGHTLY DUE TO THE NATURE OF MANUFACTURE. |
||
|