Prospect Collection of Victorian Gates & Railings from Heritage Cast Iron

A range of Prospect Heritage cast iron gates and railings
Dimensions of Prospect cast iron gates and railings

The drawings below show the options available.      You can mix and match!
It is recommended that an intermediate railing post is used approximately every 3.0 metres.
It is also recommended that a railing stay is fitted approximately every 3.0 metres.

A joiner panel is required to connect to each intermediate railing post on one side only.
No joiner panels are required if connecting to piers.

A root fixing post is required if installing an automated gate system.

A hinge and pivot set is required for base plate fixing posts.
Prospect GA032
Prospect Cast Iron Driveway Gate
12ft pair weighing 390kg 		Prospect GA034
Prospect Cast Iron Pedestrian Gate
900mm wide weighing 102kg 		Prospect GA133A
Prospect Cast Iron Railing Panel with Feet
860mm wide weighing 33kg
Prospect GA032 cast iron twelve foot wide driveway gates

Prospect cast iron 900mm wide pedestrian gate GA034

Prospect cast iron railing panel GA133A

Prospect GA134A
Prospect Cast Iron Railing Joiner Panel
weighing 15.5kg 		Prospect GA136
Prospect Railing Post
weighing 15kg
Prospect GA134A cast iron railing joiner panel

Prospect GA136 cast iron railing post


DISCLAIMER: ALL MEASUREMENTS ARE APPROXIMATE AND MAY VARY SLIGHTLY DUE TO THE NATURE OF MANUFACTURE.


top of pagehome pagecontact Fine Iron
 Cast Iron Gates 

website design & promotion - StreetwiseUK .
The Prospect Collection of Heritage cast iron gates and railings