Gilberton Collection of Victorian Cast Iron Gates & Railings

A range of cast iron gates and railings
Dimensions of Gilberton cast iron gates and railings

The drawings below show the options available.      You can mix and match!
It is recommended that an intermediate railing post is used approximately every 3.0 metres.
It is also recommended that a railing stay is fitted approximately every 3.0 metres.

A joiner panel is required to connect to each intermediate railing post on one side only.
No joiner panels are required if connecting to piers.

A root fixing post is required if installing an automated gate system.

A hinge and pivot set is required for base plate fixing posts.
GA012
Gilberton Cast Iron Driveway Gate Leaf
12ft pair weighing 464kg 		GA011
Gilberton Cast Iron Driveway Gate Leaf
10ft pair weighing 420kg 		GA010
Gilberton Cast Iron Pedestrian Gate
900mm wide weighing 128kg
Gilberton GA012 cast iron twelve foot wide driveway gates

Gilberton GA011 cast iron ten foot wide driveway gate leaf

Gilberton GA010 900mm wide cast iron pedestrian gate

GA013A
Gilberton Railing Panel with Feet
weighing 40kg 		GA129A
Gilberton Joiner Railing Panel with Feet
weighing 26kg 		GA130
Gilberton Railing Post
weighing 15kg
Gilberton GA013A railing panels with feet

Gilberton GA129A Victorian cast iron railing joiner panel

Gilberton GA130 Victorian reproduction railing post


DISCLAIMER: ALL MEASUREMENTS ARE APPROXIMATE AND MAY VARY SLIGHTLY DUE TO THE NATURE OF MANUFACTURE.


top of pagehome pagecontact Fine Iron
 Cast Iron Gates 

website design & promotion - StreetwiseUK .
Gilberton gates and railings from Heritage Cast Iron